Comments for Random Performance

Comment on Contact by luke

luke — Tue, 10 Jan 2012 05:38:28 +0000

Hi Watty

Thanks for the reply.
Where is your work shop located?
Im in Geelong.
So when i pick up a Ski you may be the first port of call i guess.
Closer to the time i will give you a call.
Thanks for your help.

Comment on Contact by Watty

Watty — Sun, 08 Jan 2012 19:44:47 +0000

Hi Luke. It depends on what you want to do with the ski. I will assume freestyle. To really have a good surf ski you will need the following…Hood straps, pole limiting rope, a/m pole spring, bilge pump/switch, footholds, turf and intake grate. These will get you up and going. When you are ready to move on, I would suggest an aftermarket head with more compression, a Factory B-pipe, aftermarket steering with straight bars, trigger throttle, and a shortened pole depending on how tall you are. These are very common modifications, and yes we can supply all the parts that you need to get this done. We can even install and tune if you like.

Comment on Contact by luke

luke — Fri, 06 Jan 2012 00:45:48 +0000

Hi i am thinking of getting a new super jet in the next few months. What do you recommend as a must have for a new ski and do you have the parts i can buy from you. I am new to all this and it is a little hard to find good info. Thanks for your help.

Comment on Contact by admin

admin — Tue, 06 Dec 2011 04:08:33 +0000

Hi Matt,

Sorry for the late reply. Yes, the RP freestlye plate helps tracking across wave faces, and alos helps loosen the tail when slashing. A bunch of guys have had great success with them especially on the 08+ Superjets. This plate with a shallow intake grate such as the Worx WR205 will really make your 2011 a much nicer and more forgiving ski in the surf.

Comment on Contact by admin

admin — Tue, 06 Dec 2011 04:06:14 +0000

Hi Tristan..Yep, the older style flush kits screw into a fitting on top of the exhaust manifold and have a hose connection. If you have a B-pipe, or some other sort of aftermarket pipe, you will probably need a flush kit that back flows water through the bypass fittings. It work every bit as good. Both are available.

Comment on Contact by admin

admin — Tue, 06 Dec 2011 04:02:28 +0000

Yep, in stock and ready to ship…

Comment on Contact by Alan Richardson

Alan Richardson — Wed, 30 Nov 2011 20:27:52 +0000

Hi was just enquiring if you have any ATP torrent intake grates in stock

Comment on Contact by Tristan

Tristan — Tue, 22 Nov 2011 03:49:02 +0000

G’day,

I’m after a flush kit for a 2007 Superjet.
My mates tell me that no one really bothers flushing these engines but I can’t imagine that would do them much good.
Do you stock flush kits or could you point me in the right direction?

Cheers

Tristan

Comment on Contact by Matthew McEwin

Matthew McEwin — Fri, 14 Oct 2011 03:05:00 +0000

Hi there,
I’m looking for a ride plate for my 2011 superjet and after reading ozfreeride forums was directed to you guys. Looking for one that makes the back end looser for sliding. Does your ride plate help in this area, or if not can you point me in the right direction? Also would a different intake grate help.
Thanks Matty.